30 ma ( typical ) , 50 ma ( max.) 0.3n sec.( typical ) ; 0.5 n sec. ( max.) bc output logic high " 1 " aging 3 ppm per year (max.) if non-standard , please enter the 50 ? into vcc - 2v or thevenin equivalent storage temperature - 50c to 100c 1.1 v ( rl = 100 ? ) output logic low " 0 " min. typical output voltage swing ef operating temperature range desired stability after the " c " or " i " " i 20 " 20 ppm over -40c to +85c 100 ppm " c20 " 20 ppm over -10c to +70c ; d industrial ( -40c to +85c ) for example : frequency stability over 25 ppm 50 ppm commercial ( -1 0c to +70c ) a 11.4 x 9.6 x 2.5 mm tri-state function available on pad no. 2. applications load hdk supeior phase noise ( -138 dbc/hz at 10 khz and -144 dbc/hz at 100 khz offset ). 2.5 v or 3.3 v supply voltage . 13.5 mhz ~ 200,0 mhz typical max. 1.43 v ( rl = 100 ? ) 1.60 v ( rl = 100 ? ) 250 mv min. ( v dd = +2.5v ) hdk femto second integrated phase jitter ( 200 fs typical , 12 khz to 20 mhz ) . current consumption ( 15 pf load ) mercury www .mercury-cryst al.com taiwan : (886)-2-2406-2779 / sales-tw@mercury-crystal.com u.s.a: (1)-909-466-0427 / sales-us@mercury-crystal.com china : (86)-512-5763-8100 / sales-cn@mecxtal.com outline dimensions ( unit : mm ) paramenters electrical spec. input voltage ( v dd ) 0.9 v ( rl = 100 ? ) frequency range / load output wave form duty cycle 50% 10% [ 50% 5% is also available ] frequency stability (1) codes integrated phase noise ( 12 khz to 20 mhz ) 0.2 ps ( typical ) ; 0.5 ps ( max.) rise time ( tr ) / fall time ( tf ) 10 mhz 2.5 v oscillators series [ differential lvds ] HDK622 series start - up time (ts) 10 m sec.( typical ) lvds output general specifications smd lvds out p ut 2.5 v 5 % features 100 hz 1k hz 10 khz 100khz 1 mhz phase noise ( typical ) [ 156.250 mhz ] dbc / hz -75 offset 10 hz -155 -90 -120 -135 -142 -147
|
